TM 5-3895-371-24 & P
r.
Position a hydraulic jack under the center of the platform. Set the jack so that it just touches
the platform.
NOTE
In steps s and t, three men are required to remove the
platform; one on each side and one operating the jack.
s .
rails fig. 4-11).
Remove two capscrews, nuts, and washers that fasten platform to left and right side frame
t.
Lower the platform on the jack; then remove the platform out from the rear of the vehicle.
Figure 4-11. Remove/Install Platform Attaching Parts.
4-11
