Figure 3-3. Remove/Install Hydraulic Pump

Figure 3-2. Hydraulic Motor Pressure Adjustment.

f. General Instructions (Before Disassembly of Hydraulic Pump)

TM-5-3895-371-24P Melter Asphalt Skid Mounted Hot Oil Circulating 750 GPH Chausse Model STMD-3000A Manual
Page Navigation
134

TM 5-3895-371-24&P e. Removal of Hydraulic Pump. (Refer to fig. 3-3.) NOTE In step (1), a 20-gallon (76 I) container, or larger, is required. (1) Drain oil from tank by removing drain plug at bottom of tank. (Refer to para 2-16.) (2) Disconnect four hoses from pump: hose (10), hose (6), and two hoses (5). LEGEND: 1. LEVER 2. PUMP 3. O-RING 4. ELBOW 5. HOSE (2) 6. HOSE 7. O-RING 8. FLANGE 9. ELBOW 10. HOSE 11. CAPSCREW (4) 12. WASHER (4) 13. NUT (4) TA 075873 Figure 3-3. Remove/Install Hydraulic Pump. 3-6

Privacy Statement
Press Release
Contact