TM 5-3895-371-24 & P
(1) Mount rail (18) to hydraulic motor (17) with one capscrew (19), nut (22) and lock-
washer (21). (Do not tighten.)
screws (19), lockwasher and nuts. (Do not tighten.)
drive chain (20) onto drive coupling (25) and finish pushing drive coupling (25) into place. Install
capscrews (24) with nuts and washers (2).
(4)
Adjust tachometer drive chain (20) to a slight tension and finish tightening capscrews
(19).
(5)
Install sprocket cover (7) with two capscrews (8) and washers (8).
(6) Install hydraulic motor (17) into place and secure with capscrews (12), washers (15),
and nuts (16).
(7)
Connect tachometer cable (5).
(8) Connect override cable (9) to override cable clamp (11). Tighten capscrew (10), washer
(13), and nut (14).
(9)
Install capscrews (1) and nuts and washers (2).
(10)
Connect hydraulic lines (30), (31), and (32).
(11)
Install hydraulic hose (27) to elbow (26) and tee (29).
3-81
