TM 5-3895-356-14&P
SPRAY BAR ASSEMBLY
SPRAY BAR ASSEMBLY DESCRIPTION
c. Disconnect left and right hinge sections.
The spray bar assembly consists of the spray bar, spray
d. Disassemble right and left hinge sections
bar extensions, and caps, valves, hinge joints and
including removal of nozzle valves.
linkages. The bar is divided into three sections having
the center section and two end sections mounted on
e. Disassemble center section including removal of
hinge joints. The spray bar can be adjusted in length by
nozzle valves.
adding or removing spray bar extensions.
f. Disassemble nozzle valves.
SPRAY BAR REMOVAL
a. Remove the spray bar sections and ball joints
SPRAY BAR CLEANING,
from center section spray bar disconnect left and right
INSPECTION, AND REPAIR
feed line.
b. Disconnect the valve actuator arm shaft from
a. Clean all parts with an approved cleaning solvent
center section spray bar.
and dry thoroughly
c. Remove upper and lower pins at the ends of the
b. Inspect all parts for cracks, bends, breaks, wear,
carrying arms.
corrosion, distortion, or damaged threads
c Repair or replace all defective parts
SPRAY BAR DISASSEMBLY
d. Reassemble spray bar In reverse order to
disassembly.
a. Remove end caps if necessary (Figure 91).
e. Install spray bar in reverse order.
b. Remove all linkages, bars, clips and toggles,
fulcrum lever and swivel bearing.
69
