LO-5-3895-334-12
*- KEY -
EXPECTED TEMPERATURES
Above +15F
+40 to -65F
+40 to -15 F
CAPACITY
(Above -9C)
(+4 to -54C)
INTERVALS
(+4 to -26 C)
GRG - Grease,
Plug Valve,
ALL TEMPERATURES
Gasoline
(TYPE I)
and Oil
Resistant
GAA - Grease,
Automotive
ALL TEMPERATURES
and Artillery
*See Note 4 for lubricant specification number.
NOTES
1.
FOR OPERATION OF EQUIPMENT IN
PROTRACTED COLD TEMPER-ATURES BELOW
-15F (-26C). Remove lubricants prescribed in Key for
temperatures above -15F (-26C). Relubricate with
lubricants specified in Key for temperatures below -15F
(-26C).
If OEA lubricant is required to meet the
temperature ranges prescribed in the Key, OEA lubricant
is to be used in place of OE/HDO-10 lubricant for all
temperature ranges where OE/HDO-10 is specified in
Copy of this Lubrication Order will remain with the
the Key.
equipment at all times , instructions contained herein are
mandatory.
2. OIL CAN POINTS. Each 50 hours, clean and lightly
coat all control linkages and exposed adjusting threads
By order of the Secretary of the Army:
with OE/H DO.
JOHN A. WICKHAM, JR.
3. WHEEL BEARINGS. Each 1000 hours, remove
General, United States Army
wheels, clean and inspect all parts, replace damaged or
Chief of Staff
worn parts, repack bearings, and assemble.
OFFICIAL:
4. LUBRICANTS. The following is a list of lubricants
with military symbols and applicable specification
ROBERT M. JOYCE
numbers.
Major General, United States Army
The Adjutant General
OE/HDO
MIL-L-2104
GAA
MIL-G-10924
DISTRIBUTION:
OEA
MIL-L-46167
GRG
MIL-G-6032
To be distributed in accordance with DA Form 12-25B,
(SD) , Type II
P-D-680
Operator and Organizational maintenance requirements
for Bituminous Heating Kettles.
TA 220201
* U.S. GOVERNMENT PRINTING OFFICE: 1984-420-903/209
CARD 3 OF 3
