INSTALL - Continued.
INSTALL FITTINGS, TUBES AND HYDRAULIC
HOSES ONTO RIGHT HAND MAIN SCREED
Place machinery wiping towels beneath hydraulic
hoses and fittings.
flammable and can be an irritant to
system. Avoid prolonged exposure.
Eye protection and rubber gloves
must be worn when working with
From inside of left hand main screed frame, pull
extension screed vibration hoses (54 and 63)
through openings in between main screed
frames until they are completely inside right hand
main screed frame.
Install straight adapters (52 and 53) and (48 and
49) onto main screed frame and secure with hex
nuts (59 through 62).
Hydraulic fitting sealant can cause
eye damage or skin irritation. Wash
after skin contact. Wear safety
goggles/glasses when using. Avoid
contact with eyes or skin. If sealant
contacts eyes, flush eyes with water
and get immediate medical attention.
Apply hydraulic fitting sealant to threads of
straight adapters (52 and 53) and (48 and 49)
and to male threads of vibration motor tube (55).
Connect screed extension cylinder tubes (57 and
58) to straight adapters (52 and 53).
Install vibration motor tubes (55 and 56) onto
straight adapters (48 and 49).
Connect left hand extension screed vibration
hose (54) to vibration motor tube (55).
GO TO NEXT PAGE