INSTALL - Continued.
INSTALL BURNER CHAMBER ASSEMBLY.
When installing the burner chamber
assembly, make sure that glow plug
is pointing out toward the rear of
assembly (24) onto main screed frame.
Connect flexible pipe (23) to burner chamber
Install lockwashers (26) onto hex head cap
Sealing compound can cause eye
goggles/glasses when using. Avoid
contact with eyes. If compound
contacts eyes, flush eyes with water
and get immediate medical attention.
Apply sealing compound to threads of hex head
cap screws (25).
Install hex head cap screws (25) into burner
chamber assembly (24). Tighten cap screws to
37 lb-ft (50 N.m).
Apply sealing compound to threads of clamp
Install clamp (22) and hex nuts (21). Tighten
hex nuts evenly to 9 lb-ft (12 N.m).
GO TO NEXT PAGE