REPLACE/REPAIR HYDRAULIC RESERVOIR COMPONENTS - Continued.
INSTALL - Continued.
INSTALL HYDRAULIC RESERVOIR.
reservoir (30). Ensure straps are evenly spaced.
approximately 150 lb (68 kg). To
avoid personnel injury, ensure all
sling straps are in good condition
and are of correct lifting capacity.
Ensure overhead hoist is in good
condition and hooks are positioned
Keep clear of hydraulic reservoir
when reservoir is being raised or
lowered. Reservoir may fall and
cause serious injury or death.
Do no allow hydraulic reservoir to
personnel and cause serious injury.
Connect overhead hoist to sling straps (32) and
position hydraulic reservoir (30) over engine
compartment. Ensure hydraulic fittings face
forward as shown.
GO TO NEXT PAGE