CLEAN - Continued.
Compressed air used for cleaning
purposes will not exceed 30 psi (207
kPa). Use only with effective chip
equipment (goggles/face shield and
gloves). Failure to take proper
precautions may result in severe
injury or loss of vision.
Use 30 psi (207 kPa) maximum compressed air
to blow any foreign material from inside corners,
threaded surfaces, and bore holes in hydraulic
Dry parts with a clean, lint-free cloth.
Thread locking compound solvent
can cause eye damage. Wear safety
goggles/glasses when using. Avoid
contact with eyes. If solvent contacts
eyes, flush eyes with water and get
immediate medical attention.
Dry fasteners with cleaning cloth.
GO TO NEXT PAGE