REMOVE FILLER ASSEMBLY.
Cleaning solvent, P-D-680, is TOXIC
and flammable. Wear protective
goggles and gloves. Use only in a
well ventilated area. Avoid contact
with skin, eyes, and clothes, and do
not breathe vapors. Keep away from
heat or flame. Never smoke when
using solvent; the flashpoint for Type
m cleaning solvent is 200°F (93,3°C).
Failure to do so may result in injury
or death to personnel.
If personnel become dizzy while
using cleaning solvent, immediately
get fresh air and medical help. If
solvent contacts skin or clothes,
flush with cold water. If solvent
contacts eyes, flush eyes with water
and get immediate medical attention.
Cleanliness is extremely important
when working around an open
hydraulic system. Ensure that the
area around the filler assembly is
clean and free of debris prior to
removal. Failure to do so could
contaminate the hydraulic system
and cause component damage.
Clean exposed surfaces of filler assembly and
surrounding area with a clean lint-free cloth
soaked in cleaning solvent. Dry area with a
clean lint-free cloth.
GO TO NEXT PAGE