REPLACE SCREED EXTENSION CYLINDER - Continued.
INSTALL - Continued.
CONNECT HYDRAULIC TUBES.
Hydraulic fitting sealant can cause eye
damage or skin irritation. Wash after
skin contact. Wear safety goggles/glasses
when using. Avoid contact with eyes or
skin. If compound contacts eyes, flush
eyes with water and get immediate
Apply hydraulic fitting sealant to threads of
straight adapters (11 and 12).
Connect tubes (9 and 10) to straight adapters
(11 and 12) on screed extension cylinder (7).
Install flat washer (8) onto extension rod (6).
Ensure that extension screed is fully
Start the paving machine and extend screed
extension cylinder (7) per TM 5389537310
into hole in endgate assembly frame.
With extension screed and screed extension
cylinder fully extended, adjust extension rod
(6) until flat washer (8) is flush against endgate
Install flat washer (5), lockwasher (4), and hex
nut (3) onto extension rod (6) and tighten hex
Tighten jam nut (19) against screed extension
GO TO NEXT PAGE