TM 5-3895-385-10
0004
Control Pedestal Beacon Keypad -- Continued.
Table 4. Left or Right Control Pedestal Beacon Keypad -- Continued.
KEY
CONTROL/INDICATOR
FUNCTION
4
Right Tow Down
Pressing and holding key will cause right tow point hydraulic cylinder to
lower screed angle at right side of screed.
This button is not active when grade control is in automatic.
LED will be illuminated when function is active.
5
Reverse Conveyor/Augers
Pressing and holding key while conveyors and augers are moving
forward will cause both right and left conveyors and augers to reverse
slowly.
LED will be illuminated when function is active.
6
Spraydown Off/On
Pressing key will turn on spraydown pump.
Pressing key again will turn off pump.
LED will be illuminated when pump is on.
7
Two Speed
Pressing key will activate high gear.
Pressing key again will return to low gear.
LED will be illuminated when in high gear.
High gear should never be used while paving.
8
Auger Bypass
Pressing key will turn off augers.
LED will be illuminated when auger bypass is active (augers will be off).
Pressing key again will turn off bypass and turn off LED (augers will
resume function).
9
Left Tow Down
Pressing and holding key will cause left tow point hydraulic cylinder to
lower screed angle at left side of screed.
This button is not active when grade control is in automatic.
LED will be illuminated when function is active.
10
Left Tow Up
Pressing and holding key will cause left tow point hydraulic cylinder to
raise screed angle at left side of screed.
This button is not active when grade control is in automatic.
LED will be illuminated when function is active.
11
Grade Control (Auto/Man)
Pressing key will toggle grade control between automatic and manual.
When in automatic, top LED will be illuminated (should not be used).
When in manual, bottom LED will be illuminated.
In manual mode, the left and right tow point hydraulic cylinder functions
will be controlled from keypad.
0004-7
