REFERENCE INFORMATION CONTROL HANDLE, BRAKE, AND STOP/RESUME CIRCUIT

CONTROL HANDLE, BRAKE, AND STOP/RESUME CIRCUIT DIAGNOSTIC FLOWCHART - TM-5-3895-373-20_302

CONTROL HANDLE, BRAKE, AND STOP/RESUME CIRCUIT DIAGNOSTIC FLOWCHART - TM-5-3895-373-20_304

TM-5-3895-373-20 Bituminous Distributor Body M918 Model D-63 Manual
Page Navigation
295

TM 5-3895-373-20 REFERENCE INFORMATION CONTROL HANDLE, BRAKE, AND STOP/RESUME CIRCUIT Brake valve solenoid coil resistance should measure between 5.9 and 7.1 ohms. Solenoid coil should be considered good unless it is burned out (open). After completing diagnostic checks, close center top right and center top left access doors per TM 5-3895-373-10. Install gauge panel per paragraph 7.6. 2-249

Privacy Statement
Press Release
Contact