ENGINE COOLANT TEMPERATURE - STE/ICE-R TEST 38

HIGH TEMPERATURE SHUTOFF CIRCUIT DIAGNOSTIC FLOWCHART - TM-5-3895-373-20_276

HIGH TEMPERATURE SHUTOFF CIRCUIT DIAGNOSTIC FLOWCHART - TM-5-3895-373-20_278

TM-5-3895-373-20 Bituminous Distributor Body M918 Model D-63 Manual
Page Navigation
269

TM 5-3895-373-20 REFERENCE INFORMATION HIGH TEMPERATURE SHUTOFF CIRCUIT ENGINE COOLANT TEMPERATURE - STE/ICE-R TEST 38 DESCRIPTION TEST PROCEDURES Measures the engine coolant temperature. 1. Set TEST SELECT switches to 38. Transducer: 12258933 2. Set Zero Offset switch on DCA housing to TEST. DCA Test Pins: n and p Measurement Range: 120 to 300°F 3. Press and hold TEST button until CAL appears on display. PRE-TEST PROCEDURES 4. Release TEST button and wait for offset value to appear Run confidence test per TM 9-4910-571-24&P. on display. If offset value is within -45 and +45, proceed. 5. Press and release TEST button. POSSIBLE ERROR MESSAGES 6. Set Zero Offset switch on DCA housing to RUN. 005 Required offset test was not performed. 7. Observe displayed value. Displayed values are in degrees Fahrenheit (°F). Expected value, under normal loading/operating conditions, is between 180° to 200°F. STE/ICE-R test #38 measures the engine coolant temperature in degrees Fahrenheit. After completing diagnostic checks, install gauge panel per paragraph 7.6. 2-223

Privacy Statement
Press Release
Contact