SCREED MAIN WEAR PLATE REMOVAL AND INSTALLATION
Screed Main Wear Plate Removal
Figure 1. Screed Electric Heater Box -- Disconnect.
1. Slide dust boot (Figure 1, Item 1) back to gain access to heater element connectors (Figure 1, Items 2 and 3).
2. Press locking tabs, and disconnect six screed heater box connectors (Figure 1, Item 3) from heater element
connectors (Figure 1, Item 2).
Note routing of heater element harness to aid in installation.
3. Route harness from screed and crown motor.