BITUMINOUS MATERIAL PAVING MACHINE (BMPM)
SPN#653, FMI#5 ― HIGH RESISTANCE OR NO CURRENT AT NUMBER THREE INJECTOR DRIVER OR
References ― Continued
WP 0345, Vol 2
WP 0357, Vol 2
WP 0443, Vol 3
WP 0448, Vol 3
WP 0277, Vol 2
WP 0451, Vol 3
WP 0327, Vol 2
WP 0332, Vol 2
Engine off (TM 5-3895-385-10)
WP 0334, Vol 2
WP 0338, Vol 2
Engine hood assembly removed (WP 0433, Vol 2)
Injector solenoids contain high voltage when engine is operating. Do not wear jewelry or damp
clothing when working around injector solenoids. Do not touch injector solenoids or solenoid
wires when engine is operating. Failure to comply may cause injury or death to personnel.
All active fault codes must be investigated prior to replacing the engine Electronic Control
Module (ECM). Failure to comply may cause damage to equipment.
Use correct probes or leads when testing harness connectors. The leads must fit tightly
inside the connector without expanding the pins in the connector. Failure to comply may
cause damage to equipment.