BITUMINOUS MATERIAL PAVING MACHINE (BMPM)
SPN#611, FMI#31 ― ELECTRONIC CONTROL MODULE (ECM) DATA LOST
References ― Continued
WP 0388, Vol 2
WP 0443, Vol 3
WP 0448, Vol 3
WP 0451, Vol 3
WP 0277, Vol 2
WP 0332, Vol 2
Engine off (TM 5-3895-385-10)
WP 0357, Vol 2
Direct Current (DC) voltages are present at Bituminous Material Paving Machine (BMPM)
electrical components even when the unit is shut down. Avoid shorting any positive with
ground/negative. Do not ground yourself in standing water. Failure to comply may cause
injury or death to personnel and damage to equipment.
Batteries give off combustible gas. Do not smoke or use open flame when working around or
near battery. Failure to comply may cause injury or death to personnel and damage to
Battery acid can cause burns to unprotected skin. Wear safety goggles and chemical gloves,
and avoid acid splash while working on the batteries. Failure to comply may cause injury or
death to personnel.
Do not damage batteries. Storage batteries are filled with a liquid acid that can leak from
sealed battery when case is broken. Contact with battery acid can burn skin and eyes. Wear
safety goggles and chemical gloves, and avoid acid splash while handling damaged
batteries. Do not lift or move batteries by using terminals. Failure to comply may cause injury
or death to personnel or damage to equipment.
All active fault codes must be investigated prior to replacing the engine Electronic Control Module
(ECM). Failure to comply may cause damage to equipment.