REPLACE MAIN SCREED FRAME - Continued.
REMOVE - Continued.
flammable and can be an irritant to
system. Avoid prolonged exposure.
Eye protection and rubber gloves
must be worn when working with
Tag and disconnect left hand extension screed
vibration hoses (38 and 39) from elbows (40 and
41). Plug hoses and cap elbows with protective
From inside of right hand main screed frame,
pull extension screed vibration hoses (38 and
39) through openings in between main screed
frames until they are completely inside right hand
main screed frame.
Tag and disconnect left hand screed extension
cylinder tubes (42 and 43) from straight adapters
(36 and 37). Plug tubes and cap adapters with
protective caps. Remove tubes from main
Remove hex nuts (44 and 45) and straight
adapters (36 and 37) from left hand main screed
GO TO NEXT PAGE