REPLACE EXTENSION SCREED FRAME - Continued
REMOVE MAIN SCREED VIBRATION MOTOR
PER TM 5-3895-373-20.
COMPONENTS FROM MAIN SCREED.
Remove spring pins (1) from universal joint (2)
and drive shafts (3) by using a 3/8 in. drive pin
punch and pliers. Discard spring pins.
Free universal joint from one of the drive shafts
by pushing one end of universal joint toward
the center. Use a large screwdriver to pry end
of universal joint off of drive shaft if necessary.
Remove universal joint (2) from main screed.
Remove socket head cap screws (4) and
lockwashers (5). Discard lockwashers.
Remove motor mount (6) from vibrator housing
Remove socket head cap screws (8) and
lockwashers (9). Discard lockwashers.
Remove retainer plate (10).
GO TO NEXT PAGE