REPLACE EXTENSION SCREED FRAME - Continued. "1l
REMOVE - Continued.
Remove hex nuts (38), washers (39), and hex
head cap screws (40) from main step (37).
Remove screed cribbing and fully lower screed
onto flat work surface. Refer to TM 5-3895-373-
Handrail with attaching steps weigh
Personnel shall stay clear of objects
being lifted during hoist operations.
Do not work on objects suspended
by a hoist. A swinging or shifting
load may cause injury or death to
With overhead lifting device, sling straps, and
the help of a second person, lift and remove
handrail with attached steps from screed.
Remove hex nut (41), lockwasher (42), flat
washers (43), and hex head cap screw (44) from
inner step support (45). Discard lockwasher.
Remove inner step support (45).
GO TO NEXT PAGE