TM 5-3895-373-34
A.
REMOVE - Continued.
2.
REMOVE CENTER COVER.
a.
Remove hex head cap screw (10) and flat
washer (11) from center cover (12).
b.
Close left rear top access door and remove
socket head cap screw (13), flat washer
(14), and hex nut (15) securing left side of
center cover (12).
c.
Open left rear top access door and close
right rear top access door and remove
socket head cap screw (13), flat washer
(14), and hex nut (15) from right side of
center cover (12).
d.
Turn center cover (12) sideways and
remove from cowling frame.
e.
Open right rear top access door.
3.
REMOVE SCREED HARNESS ELECTRICAL
PLUG AND RECEPTACLE.
a.
Disconnect screed harness electrical plug
(16).
b.
Remove hex nuts (17), machine screws
(18), and flat washers (19).
c.
Remove
screed
harness
electrical
receptacle (20) from the rear wall of the
paving machine. Position the receptacle so
that
it
does
not
interfere
with
auger/conveyor drive chain removal.
GO TO NEXT PAGE
2-863