TM 5-3895-373-34
2.63
REPLACE AND ADJUST AUGER/CONVEYOR DRIVE CHAIN - Continued.
A.
REMOVE.
NOTE
There is a left hand and a right hand
auger/conveyor drive chain on the
paving machine. This procedure
addresses
the
right
hand
auger/conveyor
drive
chain.
Procedure is identical for left hand
auger/conveyor drive chain. Right
hand auger/conveyor drive chain is
shown in this procedure.
1.
REMOVE
REAR
COVER
PLATE
FROM
AUGER/CONVEYOR DRIVE CHAIN HOUSING.
a.
Remove hex head cap screws (1), flat
washers (2), and square flat washers (3)
from rear cover plate (4).
b.
Remove
rear
cover
plate
(4)
from
auger/conveyor drive chain housing (5).
c.
Remove hex head cap screws (6), flat
washers (7), and square flat washers (8)
from bottom cover plate (9).
d.
Remove bottom cover plate (9) from
auger/conveyor drive chain housing (5).
GO TO NEXT PAGE
2-862