REPLACE - Continued.
INSTALL CENTER FLASHING.
Install flat washer (2) onto hex head cap
Thread locking compound can cause
goggles/glasses when using. Avoid
contact with eyes. If compound
contacts eyes, flush eyes with water
and get immediate medical attention.
Apply thread locking compound to threads
of hex head cap screws (1).
Ensure that center flashing is not
inside of the hopper.
With the help of another person, position
center flashing (5) and retaining plate (4) on
extension bracket (6). Ensure that center
reinforcement cords are toward the inside
of the hopper.
Install hex nuts (3), flat washers (2), and
hex head cap screws (1).
Tighten hex head cap screws (1).
Remove paving machine from cribbing and jacks per
Install screed per TM 5-3895-373-20.
END OF TASK