CLEAN ALL METAL PARTS.
Cleaning solvent, P-D-680, is TOXIC
goggles and gloves. Use only in a well
ventilated area. Avoid contact with skin,
eyes, and clothes, and do not breathe
vapors. Keep away from heat or flame.
Never smoke when using solvent; the
flashpoint for Type III cleaning solvent is
200°F (93, 30C). Failure to do so may
result in injury or death to personnel.
If personnel become dizzy while using
cleaning solvent, immediately get fresh
air and medical help. If solvent contacts
skin or clothes, flush with cold water. If
solvent contacts eyes, flush eyes with
water and get immediate medical
a. Rinse all metal parts in cleaning solvent with the
exception of inner and outer lift jack assemblies.
b. Use a culture swab to clean the threads of the
lubrication fitting port.
Dry parts with a cleaning cloth.
THREAD LOCKING COMPOUND.
Thread locking compound solvent can
cause eye damage. Wear safety
goggles/glasses when using. Avoid
contact with eyes. If solvent contacts
eyes, flush eyes with water and get
immediate medical attention.
a. Clean all threads of cap screws and set screws
with thread locking compound solvent.
b. Dry cap screws and set screws with a cleaning
GO TO NEXT PAGE