REPLACE VALVE PANEL CONTROL VALVES AND FLOW DIVIDERS - Continued.
INSTALL TUBES AND HOSES ONTO RIGHT
AUGER/CONVEYOR SPEED CONTROL VALVE.
Hydraulic fitting sealant can cause eye
damage or skin irritation. Wash after
goggles/glasses when using. Avoid
contact with eyes or skin. If sealant
contacts eyes, flush eyes with water and
get immediate medical attention.
Apply hydraulic fitting sealant to exposed threads
on straight adapter (74), tube reducer (82), and
elbows (77, 78, and 80).
Connect tubes (75 and 76) to elbows (77 and
78). Tighten tubes.
tightened at both ends, as it was loosened during
Connect hose (79) to elbow (80). Tighten hose.
Connect tube (73) to straight adapter (74).
Connect hose (81) to tube reducer (82). Tighten
GO TO NEXT PAGE