REPLACE VALVE PANEL CONTROL VALVES AND FLOW DIVIDERS - Continued.
INSTALL - Continued.
It may be necessary to connect hydraulic
tubes to auger/conveyor control valve
ports before bolts are tightened per step
Install lockwashers (136) onto bolts (135).
Thread locking compound can cause
goggles/glasses when using. Avoid
contact with eyes. If compound contacts
eyes, flush eyes with water and get
immediate medical attention.
Apply thread locking compound to the threads of
Install lockwashers (136) and bolts (135).
Tighten bolts to 19 lb-ft (26 Nm).
GO TO NEXT PAGE