INSTALL - Continued.
INSTALL AUGER/CONVEYOR FLOW DIVIDER.
It may be necessary to connect hydraulic
tubes to auger/conveyor flow divider
before bolts are tightened per step d.
Place auger/conveyor flow divider (149) into
valve panel over flow divider mounting holes.
Install lockwashers (157) onto bolts (156).
Thread locking compound can cause
goggles/glasses when using. Avoid
contact with eyes. If compound contacts
eyes, flush eyes with water and get
immediate medical attention.
Apply thread locking compound to threads of
Install lockwashers (157) and bolts (156).
GO TO NEXT PAGE