TM 5-3895-373-34
2.55
REPLACE VALVE PANEL CONTROL VALVES AND FLOW DIVIDERS - Continued.
A.
REMOVE - Continued.
12.
REMOVE AUGER/CONVEYOR FLOW DIVIDER.
Hydraulic
oil
can
be
moderately
flammable and can be an irritant to the
skin, eyes, and respiratory system.
Avoid
prolonged
exposure.
Eye
protection and rubber gloves must be
worn when working with hydraulic oil.
Thoroughly clean hoses and fittings
before disconnecting. Always plug or
cap off disconnected fittings to prevent
intrusion of contaminants. Failure to
properly clean and cap off connectors
may result in system contamination
and equipment damage.
NOTE
Before removing auger/conveyor flow
divider the return manifold must be
removed.
a.
Wipe all dust and dirt from fittings with cleaning
cloths.
GO TO NEXT PAGE
2-756