REPLACE VALVE PANEL CONTROL VALVES AND FLOW DIVIDERS - Continued.
REMOVE - Continued.
flammable and can be an irritant to the
skin, eyes, and respiratory system.
protection and rubber gloves must be
worn when working with hydraulic oil.
Thoroughly clean hoses and fittings
before disconnecting. Always plug or
cap off disconnected fittings to prevent
intrusion of contaminants. Failure to
properly clean and cap off connectors
may result in system contamination
and equipment damage.
Before valve and cylinder flow divider
can be removed, the return manifold
must be removed.
Wipe all dirt and dust from fittings with cleaning
GO TO NEXT PAGE