REMOVE - Continued.
flammable and can be an irritant to the
skin, eyes, and respiratory system.
protection and rubber gloves must be
worn when working with hydraulic oil.
To disconnect rear tow point control valve (47)
from hydraulic fittings, perform the following
disconnecting tube from elbow (104) and
straight adapter (117). Plug tube and cap
elbow and straight adapter.
Remove tube (118) from straight adapter
Remove hex nuts (120), flat washers (121), and
Remove tow point control valves (46 or 47) from
the tow point mount plate (71).
GO TO NEXT PAGE