REMOVE - Continued.
flammable and can be an irritant to
Avoid prolonged exposure. Eye
protection and rubber gloves must be
worn when working with hydraulic
Remove hex nuts (105), flat washers (106)
from bolts (107).
Remove tow point flow divider (108) and tow
point flow control valve (45) from tow point
mount plate (71).
Place tow point flow divider (108) in a bench
vise. Using an open end wrench, unscrew
pipe coupling (109) from elbow (110) and
remove tow point flow control valve (45) from
tow point flow divider. Plug pipe coupling and
GO TO NEXT PAGE