REPLACE VALVE PANEL CONTROL VALVES AND FLOW DIVIDERS - Continued
REMOVE - Continued.
Tie wraps are located as needed.
Cut and remove tie wraps (60).
Tag and disconnect rear tow point control valve
electrical connectors (61 and 62) from harness
electrical connectors (63 and 64).
Tag and disconnect front tow point control
valve electrical connectors (65 and 66) from
harness electrical connectors (67 and 68).
Remove bolts (69) and flat washers (70) from
tow point mount plate (71). Remove mount
plate from valve panel.
GO TO NEXT PAGE