REMOVE - Continued.
Cleaning solvent, P-D-680, is TOXIC
and flammable. Wear protective
goggles and gloves. Use only in a
well ventilated area. Avoid contact
with skin, eyes, and clothes, and do
not breathe vapors. Keep away from
heat or flame. Never smoke when
using solvent; the flashpoint for Type
III cleaning solvent is 200°F (93, 3°C).
Failure to do so may result in injury
or death to personnel.
If personnel become dizzy while
using cleaning solvent, immediately
get fresh air and medical help. If
solvent contacts skin or clothes,
flush with cold water. If solvent
contacts eyes, flush eyes with water
and get immediate medical attention.
Use a cleaning cloth and cleaning solvent to
remove grease and other buildup deposits
from connecting fittings.
Hydraulic oil can be moderately
flammable and can be an irritant to
system. Avoid prolonged exposure.
Eye protection and rubber gloves
must be worn when working with
Paving machine must be turned off
and hydraulic line pressure bled off
by slowly opening fitting prior to
opening a hydraulic circuit. A
pressurized hydraulic circuit can emit
a high energy spray when a hose or
fitting is opened under pressure.
Failure to slowly bleed off hydraulic
pressure may result
injuries to personnel.
connecting fittings to collect residual hydraulic
GO TO NEXT PAGE