REPAIR TOW POINT FLOW CONTROL VALVE - Continued.
ASSEMBLE - Continued.
INSTALL FITTINGS ONTO TOW POINT FLOW
Use cleaning cloth to wipe residue from threads
of all fittings.
Pipe sealant can cause eye damage
or skin irritation. Wash after skin
contact. Wear safety goggles/glasses
when using. Avoid contact with eyes
or skin. If sealant contacts eyes,
immediate medical attention.
Apply pipe sealant to pipe threads of straight
adapters (3 and 4) and male threads of pipe
bushing (5). Install and tighten straight adapters
and pipe bushing.
Apply pipe sealant to only one end of elbow (1).
Install treated side of elbow into pipe bushing (5).
Position elbow to face toward bottom of tow point
flow control valve (28). Tighten elbow.
Apply pipe sealant to exposed threads of elbow
Install pipe coupling (2) onto elbow (1). Tighten
Install tow point flow control valve on valve panel
per paragraph 2.55.
END OF TASK