DISASSEMBLE - Continued.
It is only necessary to remove the
orifice if it is to be replaced.
Use a punch and remove orifice (36) from
rivet end of valve body (24). Discard
CONTROL VALVE PARTS.
Cleaning solvent, P-D-680, is TOXIC
and flammable. Wear protective
goggles and gloves. Use only in a
well ventilated area. Avoid contact
with skin, eyes, and clothes, and do
not breathe vapors. Keep away from
heat or flame. Never smoke when
using solvent; the flashpoint for Type
III cleaning solvent is 200°F (93,3°C).
Failure to do so may result in injury
or death to personnel.
If personnel become dizzy while
using cleaning solvent, immediately
get fresh air and medical help. If
solvent contacts skin or clothes,
flush with cold water. If solvent
contacts eyes, flush eyes with water
and get immediate medical attention.
Rinse all metal parts in cleaning solvent.
Flush valve body with cleaning solvent to
remove any foreign material present. Use
a culture swab to remove foreign material
from valve body inner bore.
GO TO NEXT PAGE