Cleaning solvent, P-D-680, is TOXIC and
flammable. Wear protective goggles
and gloves. Use only in a well ventilated
area. Avoid contact with skin, eyes, and
clothes, and do not breathe vapors.
Keep away from heat or flame. Never
flashpoint for Type m cleaning solvent
is 200°F (93,3°C). Failure to do so may
result in injury or death to personnel.
If personnel become dizzy while using
cleaning solvent, immediately get fresh
air and medical help. If solvent contacts
skin or clothes, flush with cold water. If
solvent contacts eyes, flush eyes with
WIPE OFF MANIFOLDS, VALVE SPOOL,
SAFETY RELIEF VALVE, AND/OR CHECK VALVE
WITH LINT-FREE CLOTH DAMPENED WITH
DRY CLEANED COMPONENTS WITH CLEAN,
DRY, LINT-FREE CLOTHS.
Compressed air used for cleaning
purposes will not exceed 30 psi (207
kPa). Use only with effective chip
equipment (goggles/face shield and
precautions may result in severe injury
or loss of vision.
USE 30 PSI (207 kPa) MAXIMUM COMPRESSED
AIR TO REMOVE ANY FOREIGN MATTER FROM
THREADED SURFACES, BORES, AND SEAL
GROOVES ON VALVE SPOOL, SAFETY RELIEF
VALVE, AND/OR CHECK VALVE.
DRY ALL PARTS WITH A CLEAN, LINT-FREE
GO TO NEXT PAGE