REPLACE TRACK CHAIN ASSEMBLY - Continued.
INSTALL - Continued.
CONNECT TRACK TENSIONING CYLINDER
Remove tube cap from elbow (3).
Clean threads of elbow (3) with a cleaning cloth.
Hydraulic fitting sealant can cause
eye damage or skin irritation. Wash
after skin contact. Wear safety
goggles/glasses when using. Avoid
contact with eyes or skin. If sealant
contacts eyes, flush eyes with water
and get immediate medical attention.
Apply hydraulic fitting sealant to threads of elbow
Remove plug from hose (2). Connect hydraulic
supply hose to elbow (3) and tighten hose.
Install track pads on each side of chain master
pin per TM 5-3895-373-20.
FOLLOW-ON-TASKS: Remove jacks and cribbing per TM 5-3895-373-20.
Service hydraulic system per LO 5-3895-373-12.
END OF TASK