INSPECT - Continued.
Dry parts with a clean, lint-free cloth. Set dry
parts on clean surface.
Place a clean, lint-free cloth into open end of
cylinder tube to prevent contamination.
REPLACE SEALS AND PACKINGS ON
flammable and can be an irritant to
system. Avoid prolonged exposure.
Eye protection and rubber gloves
must be worn when working with
Lubricate assemblies and all seals with clean
hydraulic oil prior to reassembly.
New seals and packings are distorted
during installation. Use care during
installation to prevent damage to
seals and seal grooves. Bypass
Twist seal (10) into a C-shape. Install seal
inside cylinder head (2) and allow to snap into
Twist wiper ring (9) into a C-shape. Install wiper
ring inside cylinder head (2) and allow to snap
into wiper ring groove.
Install preformed packing (8), packing material
(7), and preformed packing (6) on cylinder head
GO TO NEXT PAGE