ASSEMBLE - Continued.
INSTALL PISTON AND DISPLACEMENT ROD
INTO PORT PLATE HOUSING.
Install piston (50). Align displacement rod
mounting hole in piston with face opening in
port plate housing (46).
Install displacement rod (49) into piston
Thread locking compound can cause
goggles/glasses when using. Avoid
contact with eyes. If compound
contacts eyes, flush eyes with water
and get immediate medical attention.
Coat threads of set screw (55) with thread
locking compound (Item 14, Appendix B).
Install set screw (55) into piston (50).
Tighten set screw.
Install adjustment bolt (54), spring (52), and
sleeve spacer (51).
Use care when removing snap and
retaining rings. Snap and retaining
rings are under spring tension and
can act as projectiles when released
and could cause severe eye injury.
Compress spring (52) and install retaining
Release spring (52).
GO TO NEXT PAGE