The instructions for disassembly and assembly
of both the left and right propulsion motors are
Thoroughly clean hydraulic tubes and fittings
before disconnecting. Always plug or cap off
disconnected fittings to prevent intrusion of
contaminants. Failure to properly clean and cap
off connectors may result in hydraulic system
contamination and equipment damage.
Wipe off hydraulic tubes and fittings with a
Hydraulic oil can be moderately flammable and
can be an irritant to the skin, eyes, and
respiratory system. Avoid prolonged exposure.
Eye protection and rubber gloves must be worn
when working with hydraulic oil.
Tag and disconnect tubes (1 through 3) at left or
right propulsion motor and allow hydraulic oil to
drain into drain pan. Plug tubes and cap elbows
and straight adapters.
Tag and disconnect tees (4 and 5) at left
propulsion motor, or tubes (6 and 7) at right
Plug tees (4 and 5) and cap straight adapter on
left propulsion motor, or plug tubes (6 and 7) and
cap straight adapter on right propulsion motor.
GO TO NEXT PAGE