REPLACE/REPAIR PROPULSION PUMP - Continued.
Paving machine tracks may move during this
procedure. Do not allow personnel to stand on
or near tracks when they are moving. Severe
personnel injury or death may result from
standing on or near tracks when they are
JACK AND CRIB PAVING MACHINE PER TM
Procedure for adjustment is the same for right
and left propulsion pumps. Right propulsion
pump is referenced in adjust procedure.
POSITION TO NEUTRAL.
Hydraulic oil can be moderately flammable and
can be an irritant to the skin, eyes, and
respiratory system. Avoid prolonged exposure.
Eye protection and rubber gloves must be worn
when working with hydraulic oil.
Remove plugs (126 and 127) from servo ports
(128 and 129).
Use hydraulic systems test and repair tool outfit
(HSTRU) and cross-port servo port (128 and
129). Refer to TM 9-4940-468-14.
GO TO NEXT PAGE