REPLACE/REPAIR PUMP DRIVE GEARBOX - Continued.
REMOVE HYDRAULIC CHARGE FILTERS, AIR
Using a second person to support hydraulic
charge filters (1), air cleaner (2), and
charge filter mounting bracket (3), remove
hex nuts (4), lockwashers (5), flat washers
(6), and socket head cap screws (7).
Remove charge filter mounting bracket (3),
hydraulic charge filters (1), air cleaner (2),
and air hose (8) from the paving machine.
DRAIN PUMP DRIVE GEARBOX OIL AND
REMOVE DRAIN LINE.
Remove drain plug (9) from drain hose (10)
and drain gear oil from pump drive gearbox
(11) into a utility pail.
Reinstall drain plug (9) into drain hose (10).
Dispose of waste gear oil in accordance
with local procedures.
Remove drain hose (10) from pump drive
Plug drain hose (10) and cap pump drive
gearbox elbow (12).
GO TO NEXT PAGE