Cleaning solvent, P-D-680, is TOXIC
and flammable. Wear protective
goggles and gloves. Use only in a
well ventilated area. Avoid contact
with skin, eyes, and clothes, and do
not breathe vapors. Keep away from
heat or flame. Never smoke when
using solvent; the flashpoint for Type
III cleaning solvent is 200°F (93, 3°C).
Failure to do so may result in injury
or death to personnel.
If personnel become dizzy while
using cleaning solvent, immediately
get fresh air and medical help. If
solvent contacts skin or clothes,
flush with cold water. If solvent
contacts eyes, flush eyes with water
and get immediate medical attention.
WIPE GASKETED MATING SURFACES OF CASE
AND CONTROL HANDLE WITH A CLEANING
CONTROL HANDLE ASSEMBLY DRY WITH A
Thread locking compound solvent
can cause eye damage. Wear safety
goggles/glasses when using. Avoid
contact with eyes. If solvent contacts
eyes, flush eyes with water and get
immediate medical attention.
CLEAN THREADS ON HANDLE WITH THREAD
LOCKING COMPOUND SOLVENT TO REMOVE
SEALING COMPOUND RESIDUE.
WIPE THREADS ON HANDLE DRY WITH A
CLEAN, LINT-FREE CLOTH.
GO TO NEXT PAGE