DISASSEMBLE - Continued.
REMOVE SCREW, CAM RING, AND RETAINING
Remove screw (130) from fuel injection pump.
Remove cam ring (131) from fuel injection
Use care when removing snap and
retaining rings. Snap and retaining rings
are under spring tension and can act as
projectiles when released and could
cause severe eye injury.
Use snap ring pliers to remove retaining ring
REMOVE DRIVE HUB AND GOVERNOR WEIGHT
Turn fuel injection pump around.
Hold drive hub (104) with a wrench from DPA
Use an adapter from DPA tool kit to loosen
socket head cap screw (133) two full turns.
Tap the end of the tool holding socket head cap
screw (133) to loosen internal parts.
GO TO NEXT PAGE