REMOVE - Continued.
Use caution when removing spring
pin. Spring held by spring pin is
under tension. Personnel injury may
result from sudden release of spring
from oil balancer unit. Do not place
fingers over spring when removing
Use a drive pin punch to remove spring pin
(82). Discard spring pin.
Remove cap (83), spring (84), and plunger
Remove screws (86) and cover (87).
Remove gasket (88). Discard gasket.
Remove bolts (89 and 90) and balancer unit
frame end (91).
Spur gears are
removed. Do not damage needle
bearings when removing gears. Pull
gears slowly and keep gears level
Remove spur gears (92 and 93) by sliding
gears out of balancer unit frame (94). Keep
gears level with frame during removal.
GO TO NEXT PAGE