DIESEL ENGINE REPAIR - Continued
REMOVE - Continued.
Remove hex head cap screws (71), machine
screws (72), tube (73), gasket (74), hex head
cap screws (75), and balancer unit cover (76).
Remove hex nut (77) and spur gear (78).
Loosen hex nut by lightly tapping with a plastic
hammer if required.
Do not damage gear shaft threads
and needle bearings when removing
gear shaft from oil pump. Oil pump
damage and engine damage may
result from a damaged gear shaft.
Pull gear shaft slowly from oil pump
Use a plastic hammer to lightly tap and pull
gear shaft (79) through oil pump.
Remove machine screws (80) and oil pump
GO TO NEXT PAGE