INSTALL - Continued.
Front engine mounting brackets and
mounts can be reached through
access door openings on the left side
of the paving machine.
Install flat washers (192), and self-locking hex
nuts (191) on hex head cap screws (202)
securing front engine mounting brackets (195)
attached to the front of the engine.
Tighten engine mounting self-locking hex nuts
(191) and flywheel housing mounting selflocking
hex nuts (191) to 150 lb-ft (203 Nm). Securely
tighten pump drive gearbox support self-locking
hex nuts (191).
q. Remove chain assembly (187) and sling strap
(184) from engine and pump assembly (190).
GO TO NEXT PAGE