ENGINE REPLACEMENT - Continued.
INSTALL - Continued.
Remove hex head cap screw (196) and
lockwasher (197) from upper left front engine
mounting bracket hole as shown. Discard
Install lockwasher (197) and engine ground wire
(198) onto hex head cap screw.
Thread locking compound can cause
goggles/glasses when using. Avoid
contact with eyes. If compound
contacts eyes, flush eyes with water
and get immediate medical attention.
Coat threads of hex head cap screw (196) with
thread locking compound and reinstall into upper
left front engine mounting bracket hole.
Tighten hex head cap screw (196) to 66 lb-ft (90
Electrical insulating varnish fumes
can be harmful if inhaled. Use only in
a well ventilated area. Avoid
prolonged exposure to fumes. If
personnel become dizzy or drowsy
during use, get immediate medical
n. Apply electrical insulating varnish to engine
ground wire (198) and hex head cap screw
GO TO NEXT PAGE