REPLACE EXTENSION SCREED GUIDE SHAFT SUPPORT, GUIDE SHAFTS, AND SLEEVE BUSHINGS -
Cleaning solvent, P-D-680, is TOXIC
and flammable. Wear protective
goggles and gloves. Use only in a
well ventilated area. Avoid contact
with skin, eyes, and clothes, and do
not breathe vapors. Keep away from
heat or flame. Never smoke when
using solvent; the flashpoint for Type
m cleaning solvent is 200°F (93, 3°C).
Failure to do so may result in injury
or death to personnel.
If personnel become dizzy while
using cleaning solvent, immediately
get fresh air and medical help. If
solvent contacts skin or clothes,
flush with cold water. If solvent
contacts eyes, flush eyes with water
and get immediate medical attention.
Rinse guide bars and guide shaft support in
cleaning solvent. Use a cleaning brush to
remove hardened deposits and excessive dirt
Dry guide bars and guide shaft support with a
clean, cleaning cloth.
CLEAN MOUNTING HARDWARE.
Thread locking compound solvent
can cause eye damage. Wear safety
goggles/glasses when using. Avoid
contact with eyes. If solvent contacts
eyes, flush eyes with water and get
immediate medical attention.
Clean threads of hex head cap screws and
socket head cap screws with thread locking
Dry with a clean, cleaning cloth.
GO TO NEXT PAGE