ASSEMBLE - Continued.
SECURE CYLINDER HEAD WITH RETAINING
Insert spanner wrench into holes on cylinder
Rotate cylinder head (1) to locate retaining
ring groove in milled opening.
Insert retaining ring (2) hook-end first into
milled opening. Ensure retaining ring
catches on cylinder head (6).
Rotate cylinder head (1), in same direction
that retaining ring was inserted, 1-1/4 turns
to pull in retaining ring (2). Ensure retaining
ring is fully seated and cylinder head is
FOLLOW-ON-TASKS: Install screed extension cylinder per TM 5-3895-373-20.
END OF TASK